Arrival overview (none pallet contolled)

In this post I’m going to be running through the steps required to process an arrival journal using the arrival process. I will cover the pallet receiving process in a separate blog as it has a few additional parameters to consider. (This is AX 2012 R1/R2).

The first task in setting up our receiving process will be to setup a Basic Item, to do this follow these steps:

  1. Open Product information management > Common > Released products
  2. Click New > Product
  3. Enter the following:
    1. Product type – Item
    2. Product subtype – Product
    3. Product name – Receive-Test
    4. Item model group – FIFO (or similar)
    5. Item group – (any)
    6. Storage dimension group – (Site, Warehouse and location controlled)
    7. Tracking dimension group –  (Batch physical inventory)
    8. Stock/Purchase/Sales/BOM unit – (any)
    9. Purchase/Sales VAT group – (any)
  4. Click OK.

Now you will need to setup the warehouse. To do this use the Warehouse check list.

Once you have set the information above up you will need to setup an arrival journal type, this will be used by AX to dictate how the item reacts through the system. To do this follow the instructions below:

  1. Open Inventory and warehouse management > Setup > Journal names, warehouse management 
  2. Create a new Item arrival and select confirm that the following parameters are un-ticked:
    1. Pallet transports – If you have this tick you will need to be using pallet controlled items. This will generate pallet transports.
    2. Check picking location – If you want to use ‘2 stage receive’ i.e. receive the stock onto the inbound dock first then put the stock away to the items default picking location tick this tick box.
    3. Check bulk location – If you are using pallet controlled items you can select this tick box to manage the bulk location put away.
  3. Save the journal name.

Next you will need to create a Purchase order for the item created before and confirm the purchase order. This should then generate a record within the arrival overview screen.

  1. Open Procurement and sourcing > Common > Purchase orders > All purchase orders
  2. Create a new purchase order for an supplier and select the item created above.
  3. Confirm this purchase order. Note – You don’t need to confirm for the order to show in the arrival overview. However you will need to confirm if you want to generate the purchase receipt from the arrival overview.
  4. Open the arrival overview screen Inventory and warehouse management > Periodic > Arrival overview
  5. Click Setup and select the setup as follows:
    1. Restrict to site – Set to the site create above
    2. Journal : Name – Set the arrival journal created above
    3. Purchase orders – Select the Purchase orders tick box
      Image
  6. Next we can choose to save this setup, to do this click Modify > Save as Select a name and click save.
  7. Navigate back to the overview tab.
  8. In the Display options section there should be an option called Setup name this should allow you to select the setup selected and other versions you might look to setup.
  9. Set your date range to pick up the purchase order created.
  10. Select this purchase order and click Start arrival.
    Image
  11. This should bring up an info log detailing the arrival journal created, double clicking this will take you directly to the arrival journal. If you need to find this selection at a later date click Journals > Show arrivals from receipts 
  12. Once in the arrival journal click Lines 
  13. Once on the arrival journal lines enter the required information including:
    1. Site and warehouse
    2. Put away location
    3. Batch ID
    4. Quantity etc..
  14. On the head click Post This should then post the arrival journal.
    NOTE – If you had the item model group parameter Supplier batch – Purchase registration selected an additional window would appear at this point allowing you to key in the vendor batch details.

Next you will need to post the product receipts, the Arrival overview screen will allow you to do this task for multiple arrival journals. To do this follow the steps below:

  1. Open Inventory and warehouse management > Periodic > Arrival overview
  2. Click Journals > Product receipt ready journal 
  3. Select the arrival journals you would like to generate the receipt for and click Functions > Purchase receipt
    Image
  4. The purchase receipt screen will then be loaded and present the user with the opportunity to enter the different purchase receipts:
    Image
  5. Click OK to post these receipts.

SUMMARY

Above we have completed the following business processes:

  • Overview screen of purchase order scheduled to arrive
  • Start the arrival for these orders and specify the put away locations
  • Update multiple product receipts in one go after checking the stock into its location.

Any questions please do ask!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s